The type of septic system installed depends on the quality and amount of soil. Most septic systems start with the septic tank. Here, the laws of gravity help get the job done. A septic tank is fitted with pipes that lead in and out of the house. Waste leaves the house and enters the septic tank which contains bacteria. The waste settles in layers with solids floating to the bottom. The bacteria helps to break down the solids. Eventually, the liquefied waste or effluent leaves the tank and heads into a series of pipes.
The pipes lead to the drain field which must be at least four feet deep. The system will not work in shallow soil. The drain field is home to more bacteria that further cleans the waste water. When the water is clean it flows back into the ground. There are those who may need a pressure distribution Septic System in Conroe TX. The tank and drain field are the same size as a regular system. However, a different method is used to get the effluent to the drain field. Usually, a pump pressurizes effluent into a pipe and it flows to the drain field. Unlike a standard system, the effluent spreads over a large area. This allows the soil to thoroughly clean the effluent.
Sand may be used in a Septic System in Conroe TX. The sand filter system is used with very shallow soil. The effluent comes out of the septic tank and a pump forces it to a box under the ground. The box contains sand and river rocks. Pressurized pipes spread effluent over the sand which filters it. Another pump forces the somewhat clean effluent to the drain field. Further, sand mounds are also used for shallow soil. Interestingly, the sand mound raises the drain field above the ground. The sand contains a gravel bed and pipes. Effluent is pumped through the pipes to the gravel bed. Finally, the effluent is treated as it flows down through the sand. Septic tanks are confusing but necessary for the home. If you have questions, visit website domain. An agent will be glad to come out and inspect your property.